Graffiti Removal SWMS – 2026 Complete Safe Work Method Statement

Description

Graffiti Removal SWMS – 2026 Edition

This Graffiti Removal SWMS is a fully editable Safe Work Method Statement for professional graffiti removal operations in Australia — covering chemical solvent removal, pressure washing and abrasive techniques on masonry, metal, glass and painted surfaces.

Compliant with Australian WHS legislation, relevant Codes of Practice for hazardous chemicals, and environmental protection requirements.

What This Graffiti Removal SWMS Covers

Planning and Surface Assessment

• Surface type and coating compatibility assessment
• Solvent flash point check
• Environmental controls — no chemical runoff to drains or waterways
• Public exclusion zone requirements

Chemical Solvent Handling — VOCs

• Key chemical hazards: xylene, toluene, MEK and acetone-based removers
• P2 masks provide NO protection against solvents — OV (Organic Vapour) cartridge respirator required
• Flash point awareness — no ignition sources in work area
• SDS on site for all chemical products
• Never mix products without compatibility check
• Ventilation requirements for enclosed or semi-enclosed surfaces

Flammable Product Controls

• CO2 or dry chemical extinguisher on site
• No ignition sources: smoking, angle grinders, heat guns near flammable solvents
• Solvent spill response — eliminate ignition first, then contain

Surface Testing Protocol

• Test patch in inconspicuous area before full application
• Dwell time per product specifications
• Damage risk assessment for sensitive coatings

Pressure Washing Integration

• Post-chemical application pressure washing controls
• Wastewater containment and disposal
• Public safety controls during water jetting

Chemical Waste Disposal

• Hazardous waste disposal via licensed contractor
• Environmental offence warning
• Empty container disposal requirements

On Completion

• Surface condition assessment
• Final chemical neutralisation
• Equipment decontamination

Emergency Response

• Chemical eye contact — 15-minute flush, call 000
• Skin contact — remove contaminated clothing, flush, seek medical attention
• Solvent vapour exposure response

Key Features

OV Respirator Requirement Explicitly Stated The most dangerous mistake in graffiti removal — using a P2 dust mask instead of an organic vapour cartridge respirator — is directly addressed in this SWMS.

Flammable Solvent Controls Flash point checks, ignition source elimination and CO2 extinguisher requirements all built in.

Environmental Offence Warning Licensed disposal requirements for hazardous chemical waste — protecting contractors from EPA liability.

Fully Editable Word Format

Unlimited Use

Bonus: Legislation Reference List included.

Who This Graffiti Removal SWMS Is For

• Graffiti removal contractors
• Council and local government asset maintenance contractors
• Commercial cleaning businesses adding graffiti removal services
• Property managers organising graffiti removal on commercial and strata properties